Planning and throwing a pool party can be a very exciting experience. However, it’s not as simple as inviting all your friends over to enjoy the pool. You’ll need to prep the pool before the party and take care of it once the party is over. Read on to learn more about the steps you’ll need to take to maintain your pool correctly.
What To Do Before a Pool Party
You have a few options you can use in the days before your pool party. One is to shock the pool. This will clean the water and give a boost to your chlorine levels. In addition, it will prep your water to be able to handle the extra load of all those suntan-covered swimmers.
Alternatively, you can use a clarifier to clean up dull or cloudy water. This chemical will cause tiny particles to combine, allowing the filter to have an easier time removing them. You’ll have sparkling water that everyone will appreciate just in time for the party.
Another step you’ll need to take is testing the water to ensure it’s balanced. Doing this will verify that the chemicals are at an acceptable level to keep the swimmers comfortable. If you need help with this step, take a sample to one of the local pool companies in Willow Grove, PA.
The Day of the Pool Party
When the day of your pool party comes around, you’ll need to do a thorough cleaning. You can either use your equipment and do it by hand or use an automatic pool cleaner.
You’ll want to check your sanitizer levels one more time to make sure they’re at acceptable levels. If not, you’ll need to make an adjustment. Adding the right chemicals will ensure your water is protected against bacteria and algae while providing a silky smooth feeling for everyone enjoying it.
When the Party Is Over
After the party, the water will be full of sunscreen, oils, dirt, and debris. You’ll need to clean this out as quickly as possible to restore the water’s balance. To do this, the best practice is shocking the pool. If you skip this step, you’ll be likely to get algae blooms due to depleted chlorine levels. It’s also a great idea to run the filter after to help eliminate the contaminants.
You’ll need to thoroughly clean the pool again. Pay close attention to the walls, vacuum debris, and use a pool skimmer to remove everything you can. You may also need to change the filter cartridges.
The day following shocking, be sure to test the water for the correct balance and make corrections as necessary. Again, if you need help, return to your local pool company for assistance.
Turn to the Pros for Expert Help
Whether you need fiberglass pools in Lansdale, PA, or expert recommendations to balance your pool water, visit Scott Payne Custom Pools for all your needs. We have everything you need to make your summer the best yet.